Overview

Use this guide when deploying SUNMI T3 PRO family devices as front-of-house Chively stations.

Before you begin

  • Confirm model and screen configuration (single or dual display variant).
  • Verify power, network, and mounted peripherals are ready.
  • Confirm the location has correct Chively terminal assignment and permissions.

Steps

  1. Install the terminal in its final counter position and route cables to reduce accidental disconnects.
  2. Boot the device and validate touchscreen response on primary and secondary displays (if installed).
  3. Sign in to Chively and run a standard order workflow from item add to payment screen.
  4. Confirm customer-facing display behavior if a secondary screen is enabled.
  5. Validate any connected accessories (scanner, drawer trigger, printer path where applicable).
  6. Set terminal naming in Chively to match the physical station label.

Screenshot Placeholder

Add screenshots for T3 PRO display checks, station assignment, and end-to-end order validation.

Recommended use cases

  • Main checkout lanes
  • Service bars and host counters
  • Fixed stations that need high throughput and stable uptime

Notes for support teams

  • T3 PRO family units are strong default choices for high-volume FOH operations.
  • Standardize firmware and Chively app versions across all terminals in the same location.
  • Use Ethernet where possible for consistent service during peak hours.

Reference links

Need help?

Contact Chively Support at +1 (800) 439-8229 or support@chively.com.